Lenovo Aptiva Hardware Maintenance Manual for NetVista 2179 and 6643 systems
Lenovo Aptiva Manual
View all Lenovo Aptiva manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo Aptiva manual content summary:
- Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 1
IBM Personal Computer Types 2179 and 6643 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 2
- Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 3
IBM Personal Computer Types 2179 and 6643 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 4
Note: Before using this information and the product it supports, be sure to read the general information under "Notices This publication was developed for products and services offered in the United States of America. IBM may not offer the products, services, or features discussed in this document in - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 5
support iv This manual contains service and reference information for the IBM Personal Computer, Types 2179 and 6643. This manual is divided into product service sections, by type, and a related service section as follows: v The product service sections include procedures for isolating problems - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 6
procéder aux opérations décrites par les instructions. Lesen Sie alle Sicherheitshinweise, bevor Sie eine support Use the World Wide Web (WWW) to download Diagnostic, BIOS Flash, and Device Driver files, and Documents. The Web address is: http://www.ibm.com/support iv Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 7
drive boot error 36 IBM Enhanced Diagnostic error codes . . . . . 37 POST error codes 54 Undetermined problems 56 Chapter 6. Parts listing 57 System Type 2179 57 System Type 6643 61 Keyboards 64 Keyboards 65 Computer power cords 66 Chapter 7. Additional service information 69 Security 69 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 8
(update POST/BIOS over network) 74 Wake on LAN 75 Chapter 8. Related service information 77 Safety notices (multi-lingual translations) . . . . 77 Safety guide 104 Problem determination tips 106 File updates 106 Adding adapters to the system 106 Software considerations 107 BIOS 107 Drivers - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 9
6643 computers. Attention: The drives in the computer you are servicing and the IBM Enhanced Diagnostics to diagnose and fix problems. 1. Types 2179 and 6643 computers default following response: a. One or two beeps (depending on the diagnostics version level). b. Readable instructions or the Main - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 10
5. v If you receive an error, replace the part that the diagnostic program calls out or go to "IBM PC Enhanced Diagnostics" on page 6. v If the The missing device is defective or it requires an additional diskette or service manual. v An unrecognizable device is installed. v A defective device is - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 11
Chapter 2. General information Features 3 Security 3 Specifications 3 Features The IBM Personal Computer Types 2179 and 6643 come with: v One EIDE hard disk drive v One 3.5-inch diskette drive v One CD-ROM drive or DVD-ROM drive v Two low-profile PCI adapter slots v Five USB connectors - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 12
v - 34 dB idle At bystander position (1 meter): v - 34 dB operating v - 29 dB idle Declared (upper limit) sound power levels: v - 5.3 bels operating v - 4.7 bels idle 4 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 13
and verify that the settings are in place when service is complete. The Setup Utility (configuration) program F1. The Setup Utility menu will appear. 4. Follow the instructions on the screen. 5. When finished, select System Summary to problems: v Beep Codes v IBM PC Enhanced Diagnostics © Copyright - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 14
6643 computers default to come up quiet (No Beep and no memory count and checkpoint code display) when no errors are detected. 2. Use Beep codes and the IBM Enhanced Diagnostics to diagnose and fix problems : v Go to http://www.ibm.com/pc/us/ v Select Support. v Select IntelliStation or Type - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 15
To select one or more tests IBM PC Enhanced Memory Diagnostics provide the capability to identify a particular memory module (SIMM, DIMM, or RIMM) which fails during testing. Use the System Board Layout section to reference the memory sockets, or select F1twice to load the Diagnostics online manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 16
the following: v Determines if Asset ID is supported on the system. v Verifies the EEPROM areas. v Performs an antenna detection test. Test results IBM PC Enhanced Diagnostic test results will produce the Contains a 2-digit check-digit value to ensure the following: 8 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 17
See "IBM Enhanced Diagnostic error codes" on page 37 for error code listings. Hard file Smart test Use the Hard File Smart Test when the system management tool has detected a hard file SMART alert. The Smart test does the following: v Interrogates IDE devices for support of the SMART instruction set - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 18
press Enter. 2. Select either the QUICK ERASE or FULL ERASE HARD DISK option and follow the instructions. Iomega Zip drive test Use the Iomega Zip Drive Test to test the Zip drive and the Errors: SIMM/DIMM/RIMM error messages issued by the IBM PC Enhanced Diagnostics: 10 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 19
Message 2xx-1y (For SIMMs) 2xx-2y (for DIMMs/RIMMs) Corrupt BIOS Test aborted by user. Note: Failure Found Recommended Actions A memory error was detected in SIMM socket Y Replace the SIMM in the socket identified by the last digit of the error code. Re-run the Test If the same error code occurs - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 20
1. Partition the remainder of the hard disk for the operating system. (The commands vary with the operating system. Refer to the operating system manual for instructions.) 2. Format the hard disk using the operating system. (The commands vary with the operating system. Refer to the operating system - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 21
assembly removal 34 Moving The Computer Take the following precautions before moving the Type 2179 or Type 6643 computer. 1. Remove all media from the drives. 2. Power-off the computer and all short distance, you can carry the keyboard on the computer base. © Copyright IBM Corp. 2004 13 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 22
BTN (button) connector 19 IR (Infra Red) connector 20 Audio I/O and USB connector 21 CPU fan connector (fan located on EMC shield) 14 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 23
Normal Clear CMOS To clear CMOS, see "CMOS Clear Procedure" on page 72. Processor Speed Settings Processor FSB speed for the IBM Personal Computer Types 2179 and 6643 are set in the Setup Utility (configuration) program. There are no jumper settings for processor speed. System Board Memory Types - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 24
voltages must be checked with the power supply cables connected to the system board. Pin Signal Function 1 3.3 V +3.3 V dc 2 3.3 V +3.3 V dc 3 COM Ground 4 5 V +5 V dc 16 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 25
panel to be replaced under warranty is 8 or more for all types 2179 and 6643 computers. If the screen has no display (black screen), do the following: 1. board. If there are scaling problems, do the following: 1. Assure latest level video drivers are installed. Chapter 4. FRU replacements 17 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 26
2. Replace system board. If you are unable to correct the problem, go to "Undetermined problems" on page 56. Computer exploded view (Types 2179 and 6643) I/O connectors and removal procedures are described on the following pages. Note: The number of defective pixels to qualify a TFT LCD panel to be - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 27
Input/Output connectors 1 Power connector 2 USB connector 3 USB keyboard and mouse connector 4 Audio line in connector 5 Audio line out connector 6 Microphone connector Chapter 4. FRU replacements 19 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 28
or DVD-ROM drive eject button 9 CD-ROM drive or DVD-ROM drive 10 Diskette drive ″in use″ indicator 11 Diskette drive 20 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 29
- + 1 Standby button 2 Standby LED 3 Num Lock LED 4 Caps Lock LED 5 Scroll Lock LED 6 Mute button 7 Stop button 8 Play/Pause button 9 Volume control 10 Next track button 11 Previous track button Rear bucket housing (rear cover) removal Chapter 4. FRU replacements 21 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 30
Note: 1. Before servicing, disconnect all cables attached to the computer. 2. For proper cooling, do cover and base cover wing removal 1. Remove the upper base cover by pulling out on the rear bottom part of the cover. 2. Gently pry the two base cover wings from the hinge stand assembly. Note the - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 31
1. Remove the rear bucket housing, see "Rear bucket housing (rear cover) removal" on page 21. 2. To release the hard disk drive, use a flat-blade screw driver to pry the latch as shown. 3. Rotate the hard disk drive outward, and disconnect the power and signal cables from the drive. 4. Lift the hard - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 32
the back interface card from the drives. 2. Remove the eight screws from both drives. 3. Pull drives out from the drive bracket assembly. 24 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 33
Speaker assembly removal 1. Remove the upper base cover, see "Upper base cover and base cover wing removal" on page 22. 2. Remove both left and right base cover wings. 3. Remove two side screws that secure the metal speaker grill. 4. Place the LCD down on a soft covered flat surface. 5. Remove the - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 34
assembly. Power supply removal Note: Make sure the power supply voltage switch is set to the proper operating voltage; 115V or 230V. 26 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 35
To remove the power supply, do the following: 1. Disconnect the power cable. 2. Remove the two base cover wings and the upper base cover from the hinge stand assembly, see "Upper base cover and base cover wing removal" on page 22. 3. Remove the rear EMC cover assembly, see "Rear EMC cover assembly - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 36
lever to the up position. Attention: Be careful not to damage the processor pins. 6. Lift the processor straight up from its socket. 28 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 37
. 6. Lift the system board from the chassis assembly. Power inverter board removal Attention: 1. Unplug the power cord from the computer before servicing the Power inverter board. 2. Do not power on the computer unless the power inverter board cover with insulator is properly installed. Chapter - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 38
see "Rear bucket housing (rear cover) removal" on page 21. 2. Remove the four power inverter board cover screws. Use the tamper resistant screw driver, IBM part number 19K3624, to remove these screws. 3. Disconnect the two end cables and the LCD cable from the power inverter board. 4. Remove the two - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 39
Chassis assembly removal 1. Remove the rear bucket housing, see "Rear bucket housing (rear cover) removal" on page 21. 2. Remove the rear EMC cover assembly, see "Rear EMC cover assembly removal" on page 23. 3. Disconnect all cables attached to the system board. 4. Unplug any installed PCI cards. 5. - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 40
to the LCD housing assembly. 3. Gently pull the bezel from the LCD housing. Note the plastic tabs on the bezel. LCD removal 32 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 41
it. Note: The number of defective pixels to qualify a TFT LCD panel to be replaced under warrant is 8 or more for all types 2179 and 6643 computers. 1. Remove the rear bucket housing, see "Rear bucket housing (rear cover) removal" on page 21. 2. Remove the four corner screws securing the bezel to - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 42
the system board. 7. Disconnect the USB card cable from the system board. 8. Remove the three screws from the hinge assembly being careful to hold and support either assembly so it will not drop. 34 Hardware Maintenance - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 43
servicing a computer. If you are unable to correct the problem using this index, go to "Undetermined problems" on page 56. Important: 1. Types 2179 and 6643 following examples. Beeps 1-2-X 4 Description v One beep v A pause (or break) FRU/Action 1. Run IBM Enhanced Diagnostics 2. Memory module - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 44
, format the hard disk drive. 3. Go to "Preparing the hard disk drive for use" on page 12. Replace the hard disk drive. 36 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 45
IBM Enhanced Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See "Diagnostics and test information" on page 5 for the - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 46
or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test memory test 4. System board 1. System board 1. System board 38 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 47
out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. System board 1. System board 1. System board 1. Device - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 48
board 1. System board 1. Run Setup and re-test 2. System board 1. Battery 2. System board 1. Flash the system 2. System board 1. System board 1. System board 40 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 49
, if installed 3. System board 1. Video card, if installed 2. System board 1. Video card, if installed 2. System board 1. Run Setup 2. Video drivers update 3. Video card, if installed 4. System board 1. Video cable 2. Monitor 3. Video card, if installed 4. System board 1. Video card, if installed - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 50
1. Go to the ″Undetermined problems″ Diskette interface test failed, cause unknown section 2. Flash the system and re-test 3. Replace component under function test 006-25X-XXX Diskette interface Error 1. Diskette drive cable 2. Diskette drive 3. System board 42 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 51
it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 011-199-XXX Serial port test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 011-2XX-XXX Serial - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 52
out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. External parallel device 2. System board 1. No action - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 53
is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action 1. Riser card if installed 2. System - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 54
cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 018-250-XXX PCI Card Services error 1. PCI card 2. Riser card, the system and re-test 3. Go to the ″Undetermined problems″ section 46 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 55
is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action Chapter 5. Symptom-to-FRU Index 47 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 56
1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action 1. RAID signal cable 2. RAID device 3. RAID adapter card, if installed 4. System board 1. Information 2. Re-start the test, if necessary 48 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 57
is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action 1. Run Setup 2. Flash the system - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 58
Code FRU/Action 071-199-XXX Audio port test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 071-25X-XXX aborted by user 1. Information 2. Re-start the test, if necessary 50 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 59
make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action 1. Microprocessor(s) 2. System board 1. Information - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 60
Sensor(s) test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to ″Undetermined problems″ section 52 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 61
000-XXX Hard Disk Drive Test Passed 217-25X-XXX 217-26X-XXX Hard Disk Drive (IDE) error FRU/Action 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. Check fans 2. Check Power supply 3. Microprocessor 4. System board 1. No action - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 62
the memory operation v Starts the video operation v Verifies that the diskette drive is working v Verifies that the hard disk drive is working 54 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 63
If the POST finishes without detecting any problems, a single beep sounds and the first screen of the operating system or application program appears. Note: Types 2179 and 6643 computers default to come up quiet (no beep and no memory count and checkpoint code display) when no errors are detected by - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 64
. 3. System Board 4. Riser card if installed Undetermined problems Check the power supply voltages (see "Power Supply" the following components (if installed) one at a time. a. Non-IBM devices b. External devices (modem the problem continues, replace the system board (see "System board removal" - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 65
13 14 15 16 17 18 19 20 21 22 8 9 10 11 23 24 25 26 27 28 30 29 System Type 2179 Type 2179 parts listing supports the following models: 700, 750, 50A, 52A, 90S, 90T, 90K, 968, 50J, 70F, 71U, 71F, 51J, 77U, 53A, 91G, 97G, 51Q, 53U, 52C, 52M - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 66
bay spring coil, spring coil bolt, drop downslide plate, drop down spring, washer, cable stand holder, pin good spacer support, M3L5 flange screw, M3L3 K-head screw and M3L5 flat screw) (models 700, 50A, 90S, 90T, 90K, 50J, 24P6083 09N3273 19K2630 19K3515 19K2632 58 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 67
53U, 53A, 77U, 97G, 52C, 52M, 52H, 77F) System board, (w/PIO) supports 933 MHz and above (models 84Q, 84J, 86U, 86S, 86H, 86Y, 86G, 86A edge saddle cable clip, I/O port shield/label, LP port brackets, one port bracket screw and expansion PCI bracket) (all models) Power inverter board Parts listing 59 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 68
push button (Includes cone/button spring, lever shaft, top lever holder and device drop lever) (all models) 60 Hardware Maintenance Manual FRU No. 19K3410 09N3284 31P4100 09N3270 19K2633 09N2674 19K3406 09N2675 09N2676 24P6074 09N2677 22P2321 09N2672 09N2658 09N2668 09N2666 09N2670 09N2661 09N2659 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 69
) Screw Driver, Tamper Resistant for removing Power Inverter board (all models) Flash ROM Module, w/Basic level BIOS (all models) FRU No. 19K3403 19K3353 19K3354 19K3351 19K3352 09N5527 09N5529 19K1991 10L6149 19K2634 19K3624 22P2310 System Type 6643 Type 6643 parts listing supports the following - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 70
17 18 19 20 21 22 23 System (Type 6643) Rear EMC cover assembly (Includes rear EMC cover, washer, cable stand holder, pin good spacer support, M3L5 flange screw, M3L3 K-head screw and shield/label, LP port brackets, one port bracket screw and expansion PCI Hardware Maintenance Manual FRU No. - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 71
24 25 26 27 28 29 30 System (Type 6643) DASD Interface (FDD/CD-ROM board) (all (all models) Screw Pack (Includes 4 rubber feet and screws) (all models) Screw Driver, Tamper resistant for removing Power Inverter board (all models) Flash ROM module, w/Basic level 22P2310 Chapter 6. Parts listing 63 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 72
(models 968, 81G, 86G) Thailand (models TBD) Turkish (ID 179) (models TBD) Turkish (ID 440) (models TBD) 64 Hardware Maintenance Manual FRU 09N5670 09N5680 09N5690 09N5671 09N5672 09N5673 09N5674 09N5675 09N5676 09N5677 09N5678 09N5679 09N5682 09N5683 09N5684 09N5685 09N5686 09N5687 09N5688 09N5689 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 73
GG1) PC Next, Black Keyboards Type 6643 - USB Standard Stealth Black Note: Keyboards are USB interface, no adapter, no USB ports. Keyboards - Type 6643 Arabic Belgian-French Belgian-UK Brazil/Portugal Bulgarian 09N5606 09N5607 09N5608 09N5609 09N5610 09N5611 09N5612 Chapter 6. Parts listing 65 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 74
Keyboards - Type 6643 Portuguese Romania Russian Russian/Cyrillic Serbian/Cyrillic Slovakian Spanish Swed/ (model 968) Latin-America Hi Voltage (model 90T) 66 Hardware Maintenance Manual FRU 09N5613 09N5614 09N5615 09N5616 09N5617 09N5618 09N5619 09N5620 09N5621 09N5622 09N5624 09N5623 09N5625 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 75
model 968) Denmark (model 968) Italy, Chile (model 968) Power Cords - Type 6643 Argentina Australia Bolivia Brazil Canada Chile China Columbia Costa Rica Denmark Dominican Republic Ecuador El Salvador 13F9956 13F9975 13F9956 13F9956 13F9975 13F9956 13F9956 14F0029 13F9956 Chapter 6. Parts listing 67 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 76
The following tools are required to service these computers: v A volt-ohm meter, IBM P/N 73G5404 v Tamper resistant screw driver IBM P/N 19K3624 68 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 77
. The computer starts after the proper password is entered. Removing a power-on password: To service a computer with an active and unknown power-on password, power-off the computer and use housing. 9. Remind the user to enter a new password when service is complete. © Copyright IBM Corp. 2004 69 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 78
password, the configuration can be viewed but not changed. Note: Types 2179 and 6643 have Enhanced Security Mode. If Enhanced Security mode is enabled and there is no ) or secondary (slave). Attention: Types 2179 and 6643 use a single drop cable with a hard disk drive jumper setting as Primary. - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 79
where to obtain the latest level of BIOS. v Current Level BIOS information - Run the Configuration Utility to determine the level of BIOS installed. Chapter 7. Additional service information 71 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 80
number is displayed with an option to update it. Press Y to update the serial number. 6. Type the 7-digit serial number of the computer you are servicing, then press Enter. 7. Follow the instructions on the screen to complete the flash (BIOS/VPD) update procedure. 72 Hardware Maintenance - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 81
for Advanced Power Management (APM) BIOS mode are ignored. Not all operating systems support ACPI BIOS mode. Advanced Power Management Energy-saving settings can be viewed and changed Power Management from the Configuration/Setup Utility program menu. Chapter 7. Additional service information 73 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 82
(Æ) to change the setting. 4. Press Esc to go back one screen. 5. Select Automatic Hardware On. 6. Set Automatic Hardware Power press Esc and follow the instructions on the screen. Automatic features can be used on the types 2179 and 6643 computers. For further information, see "Wake on LAN Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 83
Utility program, press Esc and follow the instructions on the screen. Wake on LAN This setting is used to enable or disable the IBM-developed Wake on LAN feature. This feature makes Utility program, press Esc and follow the instructions on the screen. Chapter 7. Additional service information 75 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 84
76 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 85
guide 104 Problem determination tips 106 File updates 106 Adding adapters to the system 106 Software considerations 107 BIOS 107 Drivers must also be connected to properly wired receptacles. When possible, use one hand to connect or disconnect signal cables to prevent a possible shock - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 86
telephone cable. CAUTION: When replacing the battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the drive could result in exposure to hazardous laser radiation. There are no serviceable parts inside the CD-ROM drive. Do not remove the CD-ROM drive Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 87
hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunications systems, networks, and modems before you open the server covers, unless instructed otherwise in the installation and configuration procedures. Chapter 8. Related service information 79 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 88
tudo. 2. Remova primeiro o(s) cabo(s) de alimentação das tomadas. 3. Remova os cabos de sinal dos receptáculos. 4. Remova todos os cabos dos dispositivos. 80 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 89
Cuidado: Ao substituir a bateria, utilize apenas o Número de Peça IBM 33F8354 ou um tipo de bateria equivalente recomendado pelo fabricante. Se seu sistema o feixe de laser, não olhe diretamente com instrumentos óticos, e evite exposição direta ao raio. Chapter 8. Related service information 81 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 90
de telecomunicação, redes e modems antes de abrir as tampas do servidor, a menos que receba outras instruções nos procedimentos de instalação e configuração. 82 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 91
Chapter 8. Related service information 83 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 92
84 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 93
Chapter 8. Related service information 85 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 94
86 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 95
Chapter 8. Related service information 87 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 96
placez le présent produit ou des périphériques qui lui sont raccordés, reportez-vous aux instructions ci-dessous pour connecter et déconnecter les différents cordons. Connexion Déconnexion 1. Mettez les des prises. 4. Débranchez tous les câbles des unités. 88 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 97
Remplacez la pile usagée par une pile de référence identique exclusivement - voir la référence IBM - ou par une pile équivalente recommandée par le fabricant. Si votre système observer à l'aide d'instruments optiques. évitez une exposition directe au rayon. Chapter 8. Related service information 89 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 98
hors tension et déconnectez ses cordons d'alimentation, ainsi que les câbles qui le relient aux réseaux, aux systèmes de télécommunication et aux modems (sauf instruction contraire mentionnée dans les procédures d'installation et de configuration). 90 Hardware Maintenance - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 99
. 3. Signalkabel von Anschlußbuchsen lösen. 3. ZSignalkabel an Anschlußbuchsen anschließen. 4. Alle Kabel von Einheiten lösen. 4. Netzstecker an Steckdose anschließen. 5. Gerät einschalten. Chapter 8. Related service information 91 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 100
Achtung: Eine verbrauchte Batterie nur durch eine Batterie mit der IBM Teilenummer 33F8354 oder durch eine vom Hersteller empfohlene Batterie ersetzen. Wenn Ihr System ein sehen, nicht direkt mit optischen Instrumenten betrachten und den Strahlungsbereich meiden. 92 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 101
angeschlossenen Netzkabeln, Telekommunikationssystemen, Netzwerken und Modems ist vor dem öffnen des Servergehäuses zu unterbrechen (sofern in Installations-und Konfigurationsanweisungen nicht anders angegeben). Chapter 8. Related service information 93 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 102
tutti i dispositivi. 2. Rimuovere prima il(i) cavo(i) di alimentazione dalla presa elettrica. 3. Rimuovere i cavi di segnale dalle prese. 4. Rimuovere tutti i cavi dalle unità. 94 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 103
la batteria, utilizzare solo una batteria IBM o batterie dello stesso tipo o di controlli, regolazioni o l'esecuzione di procedure on descritti nel presente manuale possono provocare l'esposizione a radiazioni pericolose. L'apertura di un di di sicurezza. Chapter 8. Related service information 95 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 104
, i sistemi di telecomunicazioni, le reti e ed i modem prima di aprire i coperchi del servente se non diversamente indicato nelle procedure di installazione e configurazione. 96 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 105
Chapter 8. Related service information 97 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 106
98 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 107
cables de alimentación de las tomas. 3. Retire los cables de señal de los receptáculos. 4. Retire todos los cables de los dispositivos. Chapter 8. Related service information 99 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 108
Percaución: Al cambiar la batería, utilice únicamente la batería IBM Número de pieza 33F8354 o un tipo de batería equivalente recomendado por el fabricante. Si el sistema tiene al haz, no lo observe directamente con instrumentos ópticos y evite la exposición directa. 100 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 109
módems antes de abrir las cubiertas del servidor, salvo que se indique lo contrario en las instrucciones de las operaciones de instalación y configuración. Chapter 8. Related service information 101 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 110
with which you need to be familiar, before you service an IBM mobile computer. General safety Follow these rules to ensure hazardous position. v Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine. v Keep your tool case away Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 111
to switch off the power, if necessary. - Use only one hand when working with powered-on electrical equipment; keep the work with very high voltages; these instructions are in the safety sections of injury and machine damage. v Do not service the following parts (or similar units) with the power on - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 112
parts. v Keep the parts in service personnel from injury. This guide IBM features or options not covered by this inspection guide . If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 113
in the parts listings. c. Insulation must not be frayed or worn. 4. Remove the cover. 5. Check for any obvious non-IBM alterations. Use good judgment as to the safety of any non-IBM alterations. 6. or rivets) have not been removed or tampered with. Chapter 8. Related service information 105 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 114
systems will often resolve problems. File updates Use the IBM support area on the World Wide Web (WWW) to download Diagnostic, BIOS Flash, and Device Driver files. http://www.ibm.com/support Adding adapters to the probably function. The second device will not be found. 106 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 115
the problem. A software problem might be the result of a mismatch between the hardware and the operating system device drivers or direct drivers. BIOS The BIOS acts as an interface between the system hardware, application software, and the operating system. The BIOS contains the instructions to - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 116
programs that come with this HMM or with the system you are servicing to test the IBM components of the system and some external devices. Also, from the if the POST finds a problem. One beep indicates that the POST completed successfully. Multiple beeps indicate a problem was found. v Diagnostic - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 117
range from 0 to 15). v Interrupts the processor to force it to service the request. v Handles interrupts on a priority basis (low numbers have have onboard memory, then the following are true. v ROM contains operating instructions for the adapter I/O. v RAM is used for buffering. Two adapters using - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 118
The IRQ levels, DMA channels, I/O address, and ROM and RAM addresses all become potential conflicts and system problems. When conflicts arise, they might show up as system hangs, lost or missing devices, incorrect or bad data, or failing diagnostics. Always eliminate conflicts in - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 119
Adapter Electrostatic Discharge Enhanced Small Device Interface Electrically Erasable Programmable Read-Only Memory Energy Work Station Field Replaceable Unit (replaceable part) General Purpose Interface Bus (IEEE 348) General Services Administration Chapter 8. Related service information 111 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 120
SCSI SCSI ID SPD 112 Hardware Maintenance Manual Information Height Integrated Drive Electronics Integrated Circuit International Organization for Standardization Integrated-Services Digital Network Local Area Network Network Driver Interface Specification Non-Maskable Interrupt National Support - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 121
Term SR SRAM SVGA STN T/A TDD TFT TPF TSR UL VCA VESA VGA VPD VRAM WORM XGA Y/C Information Service Representative Static Random Access Memory Super Video Graphics Array (800x600x16) Super Twisted Nematic NDD Technical Advisor (see your Marketing Representative) Telecommunications Device for the - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 122
survey, complete it, and then fax it to IBM HMM Survey at 919-543-8167 (USA). Name Phone number 1. Do you like this manual? Please comment. h Yes h No 2. What would you like to see added, changed, or deleted in this manual 3. What is your service level experience level? h Less than five years - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 123
4. Which computers do you service most Thank you for your response! Chapter 8. Related service information 115 - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 124
IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Subject to IBM product, program, or service may be used instead of the IBM product, program, or service. The evaluation and verification - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 125
are trademarks of the IBM Corporation in the United States or other countries or both. Alert on LAN AT EduQuest HelpFax Intellistation NetVista OS/2 PC 700 logo are registered trademarks of Microsoft Corporation. Other company, product and service names used in this publication may be trademarks or - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 126
118 Hardware Maintenance Manual - Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 127
- Lenovo Aptiva | Hardware Maintenance Manual for NetVista 2179 and 6643 systems - Page 128
Part Number: 19K6513 Printed in USA (1P) P/N: 19K6513
IBM
Personal
Computer
Types
2179
and
6643
Hardware
Maintenance
Manual
±²³