Lenovo C540 Touch Lenovo C540 Hardware Maintenance Manual - Page 56
Step 13. Holding the sides of the microprocessor with your fingers, remove the protective cover
View all Lenovo C540 Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Step 13. Holding the sides of the microprocessor with your fingers, remove the protective cover 1 that protects the gold contacts on the new microprocessor. 2 Step 14. Holding the sides of the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket. Important: To avoid damaging the microprocessor contacts, keep the microprocessor completely level while installing it into the socket. Step 15. Lower the microprocessor straight down into its socket on the motherboard. Step 16. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. Step 17. Use a thermal grease syringe to place 5 drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). Step 18. Reattach the heat-sink, EMI cover, middle cover, optical drive, stand holder, foot cover and stand base. 50 Lenovo C540Hardware Maintenance Manual