Lenovo C560 Lenovo C560 Hardware Maintenance Manual - Page 30

Removingthestandbase, Removingthefootcover - touch screen

Get Lenovo C560 PDF manuals and user guides View all Lenovo C560 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Removing the stand base Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage. Step 1. Step 2. Step 3. Step 4. Step 5. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right views" and "Rear view" for help with locating the various connectors. Twist the hand screw ring counter-clockwise until the base comes loose to release the stand base from the stand holder. 1 Slide the stand base out from the holder then put it aside. 2 Step 6. Refer to "Installing the computer stand" to reinstall the stand base. Removing the foot cover Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. 24 Lenovo C560Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
Removingthestandbase
Attention:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note:
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches
or other damage.
Step 1.
Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right views”
and “Rear view” for help with locating the various connectors.
Step 4.
Twist the hand screw ring counter-clockwise until the base comes loose to release the stand base
from the stand holder.
1
Step 5.
Slide the stand base out from the holder then put it aside.
2
Step 6.
Refer to “Installing the computer stand” to reinstall the stand base.
Removingthefootcover
Attention:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
24
Lenovo C560Hardware Maintenance Manual