Lenovo G230 3000 G230 User guide - Page 34
To Set a Supervisor Password
View all Lenovo G230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Lenovo G230 UG V1.0_en.book Page 26 Monday, July 28, 2008 7:29 PM Chapter 2. Using Your Computer Hard disk drive (HDD) password Once an HDD password is set, you will need to enter it in order to access the hard disk. You can set the HDD password with Primary Hard Disk Password in Security. To Set a Supervisor Password: Only a system administrator will be able to perform this procedure. 1 Turn on your computer. Press F2, while the initial screen is displayed. The InsydeH2O Setup Utility screen opens. 2 Select Security, using the cursor directional keys. 3 Select Set Supervisor Password, and press the Enter key. The Set Supervisor Password window opens. 4 Choose your Supervisor password, which can be from two to eight alphanumeric characters in any combination. Type it in the Enter New Password field. 5 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 6 Commit your password to memory, and press the Enter key. 7 Press F10 to exit. 8 Select Yes in the "Exit Saving Changes" window. 26