Lenovo G530 Laptop User Guide - Page 35
Set Supervisor Password, Enter, Enter Current, Password, Enter New Password, Password on boot, Enabled
View all Lenovo G530 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2. Using your computer Changing or removing the supervisor password To change the password, do the following: 1 Select Set Supervisor Password, and press the Enter key. The Set Supervisor Password window opens. 2 Choose your Supervisor password, which can be from one to eight alphanumeric characters in any combination. Select Enter Current Password and type in the correct password. Then press the Enter key once to move to the Enter New Password field, type in a new supervisor password. 3 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 4 Commit your password to memory, and press the Enter key. To remove password, do the following: 1 Select Set Supervisor Password, and press the Enter key. 2 Select Enter Current Password and type in the correct password, and finally press the Enter key thrice. Note: Make sure Password on boot is set to Enabled if you desire password protection at power on. 27