Lenovo H210 H210 Hardware Replacement Guide - Page 16

To replace a memory module

Page 16 highlights

To replace a memory module: 1. Remove the computer cover. Refer to "Removing the computer cover". Note: For this procedure, it helps to lay the computer on its side. 2. Locate the memory module connectors. Refer to "Locating components". 3. Remove the memory module being replaced by opening the retaining clips as shown. 4. Position the new memory module over the memory connector. Make sure the notch on the memory aligns correctly with the connector key on the system board. Push the memory module straight down into the connector until the retaining clips close. 5. Refer to the "Completing the installation". 31035102_3000 H_HRG_EN.indd 13 Hardware Replacement Guide 13 2008.8.21 2:19:24 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

13
Hardware Replacement Guide
To replace a memory module:
1.
Remove the computer cover. Refer to “Removing the computer cover”.
Note:
For this procedure, it helps to lay the computer on its side.
2.
Locate the memory module connectors. Refer to “Locating components”.
3.
Remove the memory module being replaced by opening the retaining clips as
shown.
4.
Position the new memory module over the memory connector. Make sure
the notch
on the memory aligns correctly with the connector key
on the
system board. Push the memory module straight down into the connector
until the retaining clips close.
5. Refer to the “Completing the installation”.
3
035
02
3000 H
HRG
3
2008 8 2
2:
9:24 P