Lenovo IdeaCentre A700 Lenovo IdeaCentre A700 Hardware Maintenance Manual - Page 45
Replacing the touch module
View all Lenovo IdeaCentre A700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 8. Replacing hardware Replacing the touch module To replace the touch module: 1. Remove the computer stand. Refer to "Removing the computer stand". 2. Remove the computer cover. Refer to "Removing the computer cover". 3. Remove the 2 screws that secure the touch module to the chassis. 4. Slide out then lift up the touch module. 5. Disconnect the cables from the touch module. 6. Reconnect the cables to the new touch module. 7. Align then screw in the new touch module to the chassis. 8. Install the computer cover and computer stand. 43
Chapter 8. Replacing hardware
43
Replacing the touch module
To replace the touch module:
1.
Remove the computer stand. Refer to “Removing the computer stand”.
2.
Remove the computer cover. Refer to “Removing the computer cover”.
3.
Remove the 2 screws that secure the touch module to the chassis.
4.
Slide out then lift up the touch module.
5.
Disconnect the cables from the touch module.
6.
Reconnect the cables to the new touch module.
7.
Align then screw in the new touch module to the chassis.
8.
Install the computer cover and computer stand.