Lenovo IdeaCentre B305 Lenovo IdeaCentre B305 Hardware Maintenance Manual V2.1 - Page 55
Replacing the touch module
![]() |
View all Lenovo IdeaCentre B305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 8. Replacing hardware 6. Disconnect the cable from the camera. 4. Connect the cable to the new camera. 5. Align then screw in the new camera. 6. Align then screw back the shell. 7. Install the computer cover and screw back the computer stand. Replacing the touch module To replace the touch module: 1. Remove the computer stand. Refer to "Removing the computer stand". 2. Remove the computer cover. Refer to "Removing the computer cover". 3. Remove the screw that secures the touch module cover to the chassis. 4. Slide out the touch module cover. 5. Remove the screw that secures the touch module to the chassis and lift it up. 53
![](/manual_guide/products/lenovo-ideacentre-b305-lenovo-ideacentre-b305-hardware-maintenance-manual-v21-694a3fe/55.png)
Chapter 8. Replacing hardware
53
6.
Disconnect the cable from the camera.
4.
Connect the cable to the new camera.
5.
Align then screw in the new camera.
6.
Align then screw back the shell.
7.
Install the computer cover and screw back the computer stand.
Replacing the touch module
To replace the touch module:
1.
Remove the computer stand. Refer to “Removing the computer stand”.
2.
Remove the computer cover. Refer to “Removing the computer cover”.
3.
Remove the screw that secures the touch module cover to the
chassis.
4.
Slide out the touch module cover.
5.
Remove the screw that secures the touch module to the chassis and
lift it up.