Lenovo IdeaCentre D400 Lenovo IdeaCentre D400 Series Hardware Maintenance Manu - Page 47
Replacing the memory module
View all Lenovo IdeaCentre D400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 7. Replacing hardware Replacing the memory module To replace the memory module 1. Remove the cover. Refer to "Removing the cover". 2. Remove the front bezel. Refer to "Replacing the front bezel". 3. Slide the system board tray out of the home center chassis. (1) Insert your thumb into the thumb hole, then press in the tab to release the system board tray. (2) Pull the tray out until you can gain access to the memory connector. 4. Remove the memory module. (1) Open the retaining clips on both sides of the memory connector to release the memory module. (2) Lift the memory module from the connector. 42
42
Chapter 7. Replacing hardware
Replacing the memory module
To replace the memory module
1.
Remove the cover. Refer to “Removing the cover”.
2.
Remove the front bezel. Refer to “Replacing the front bezel”.
3.
Slide the system board tray out of the home center chassis.
(1)
Insert your thumb into the thumb hole, then press in the tab to release
the system board tray.
(2)
Pull the tray out until you can gain access to the memory connector.
4.
Remove the memory module.
(1)
Open the retaining clips on both sides of the memory connector to
release the memory module.
(2)
Lift the memory module from the connector.