Lenovo IdeaCentre K315 Lenovo IdeaCentre K3 Series Hardware Replacemeng Guide - Page 43
Replacing the external speaker, Completing the installation, To complete the part installation
View all Lenovo IdeaCentre K315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Replacing the external speaker 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down the computer, and turn off all attached devices. 2. Unplug all power cords from electrical outlets. 3. Locate the Speaker. Refer to "Locating connectors on the rear of the computer" and "Locating connectors on the front of the computer". Your speaker may be connected to the audio connector at either the front or rear of the computer. Locate the connector for the speaker. 4. Disconnect the defective speaker cable from the computer and connect the new speaker cable to the same connector. Completing the installation After replacing a new part or parts, you will need to close the computer cover and reconnect all cables, including telephone lines and power cords. In addition, depending on the part that was replaced, you may also need to confirm the updated information in the Setup Utility program. Refer to "Starting the Setup Utility" in the User Guide or in the Hardware Maintenance Manual for further information. To complete the part installation: 1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. Refer to "Locating components and connectors". 2. Make sure that all cables are routed correctly before replacing the computer cover. 38 Hardware Replacement Guide