Lenovo IdeaCentre K330B Lenovo IdeaCentre K330B Hardware Replacement Guide V5. - Page 35
Replacing the CPU
View all Lenovo IdeaCentre K330B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Replacing the CPU Attention: Do not remove the computer cover or attempt any repair before reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com To replace an CPU 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the front bezel. Refer to "Removing the front bezel". 3. Remove the system board. Refer to "Replacing the heat sink assembly". 4. Remove the heat sink and fan assembly. Refer to "Replacing the heat sink assembly". 5. To remove the microprocessor from the system board, lift the small handle and open the retainer . Important: Do not touch the gold contacts on the bottom of the microprocessor. When handling the microprocessor, touch only the sides. 32 Hardware Replacement Guide 3(7 &/ 3 JOEE