Lenovo IdeaCentre K330B Lenovo IdeaCentre K330B Hardware Replacement Guide V5. - Page 41

Hardware Maintenance Manual

Page 41 highlights

3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover engage the rails. Then, push the computer cover closed until it snaps into position. 4. Reconnect the external cables and power cords into the computer. Refer to "Locating connectors on the front of the computer" and "Locating connectors on the rear of the computer". 5. To update your configuration settings, refer to "Starting the Setup Utility" in the Hardware Maintenance Manual. Note: In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will either come with the CRU or will arrive a few days after the CRU has been delivered. 38 Hardware Replacement Guide 3(7 &/ 3 JOEE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

38
Hardware Replacement Guide
3.
Position the computer cover on the chassis so that the rail guides on the
bottom of the computer cover engage the rails. Then, push the computer
cover closed until it snaps into position.
4.
Reconnect the external cables and power cords into the computer. Refer to
“Locating connectors on the front of the computer” and “Locating connectors
on the rear of the computer”.
5.
To update your configuration settings, refer to “Starting the Setup Utility” in the
Hardware Maintenance Manual
.
Note:
In most areas of the world, Lenovo requires the return of the defective
CRU. Information about this will either come with the CRU or will arrive a few
days after the CRU has been delivered.
31048526 IC K3 HRG V5.0 (EN)(R).indd
38
2011-3-14
17:34:19