Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 8181, 8182, 830 - Page 10
RECEIVE, CORRECT, RESPONSE?, Power, Management, Disabled, Automatic, Hardware
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
DID YOU RECEIVE THE CORRECT RESPONSE? If NO, continue to 002 . If YES, proceed to 003 . 002 If the Power Management feature is enabled, do the following: 1. Start the Configuration/Setup Utility program (see "Setup Utility program" on page 24) 2. Select Power Management from the Configuration/Setup Utility program menu. 3. Select APM. 4. Be sure APM BIOS Mode is set to Disabled. If it is not, press Left Arrow (}) or Right Arrow (Æ) to change the setting. 5. Select Automatic Hardware Power Management. 6. Set Automatic Hardware Power Management to Disabled. 7. If the problem persists, continue to 003 . 003 Run the Diagnostic programs. If necessary, refer to "Diagnostics" on page 26. v If you receive an error, replace the part that the diagnostic program calls out or go to ″Symptom-to-FRU Index″ on page 87. v If the test stops and you cannot continue, replace the last device tested. 4 Hardware Maintenance Manual