Home » Lenovo Manuals » Desktops » Lenovo NetVista » Manual Viewer

Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 8181, 8182, 830 - Page 85

Disconnect, wires, power, supply, attached, Remove, screws, place., cover., Types, chassis., chassis

Get Lenovo NetVista PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

2. Disconnect all wires that the power supply is attached to. 3. Remove the two screws that hold the power supply in place. 4. Lift the power supply out. Types 8305, 8306, 8309, and 8313 1. Remove the cover. See "Types 8305, 8306, 8309, and 8313" on page 40. 2. Remove the four screws that hold the power supply to the back of the chassis. 3. The power supply is attached to the base of the chassis by a latch on the front. Slide the power supply forward to detach if from the chassis. 4. Lift out the power supply. Chapter 6. FRU Removals 79

Section	Page
Contents	5
Chapter 1. About this manual	7
Important Safety Information	7
Chapter 2. General Checkout	9
Chapter 3. General information	11
Features	11
Types 8301 and 8302	11
Types 8303, 8304, and 8312	13
Types 8305, 8306, 8309, and 8313	15
Types 8307, 8308, 8310, 8311, 8314, and 8315	17
Physical specifications	19
Types 8301 and 8302	19
Types 8303, 8304 and 8312	20
Types 8305, 8306, 8309, and 8313	22
Types 8307, 8308, 8310, 8311, 8314, and 8315	23
Available options	24
Types 8301 and 8302	24
Types 8303, 8304 and 8312	25
Types 8305, 8306, 8309, and 8313	26
Types 8307, 8308, 8310, 8311, 8314, and 8315	27
Chapter 4. Diagnostics	29
Setup Utility program	30
Product Recovery Program menu	31
Diagnostics	32
Diagnostics program download	32
Navigating through the diagnostics programs	32
Running diagnostics tests	32
Test selection	32
Test results	33
Fixed disk advanced test (FDAT)	33
Quick and Full erase - hard drive	35
Viewing the test log	36
Chapter 5. Installing Options	37
Installing external options	37
Locating connectors on the front	37
Types 8301 and 8302	37
Types 8303, 8304, and 8312	37
Types 8305, 8306, 8309, and 8313	38
Types 8307, 8308, 8310, 8311, 8314, and 8315	38
Locating the connectors on the rear	39
Types 8301 and 8302	39
Types 8303, 8304, and 8312	41
Types 8305, 8306, 8309, and 8313	43
Types 8307, 8308, 8310, 8311, 8314, and 8315	43
Obtaining device drivers	45
Installing internal options	45
Removing the cover	46
Types 8303, 8304, and 8312	46
Types 8305, 8306, 8309, and 8313	46
Types 8307, 8308, 8310, 8311, 8314, and 8315	47
Locating components	48
Types 8303, 8304, and 8312	48
Types 8305, 8306, 8309, and 8313	49
Types 8307, 8308, 8310, 8311, 8314, and 8315	50
Identifying parts on the system board	50
Types 8303, 8304, and 8312	50
Types 8305, 8306, 8309, and 8313	51
Types 8307, 8308, 8310, 8311, 8314, and 8315	52
Installing memory	53
Installing adapters	54
Types 8303, 8304, and 8312	54
Installing adapters in Types 8305, 8306, 8309, and 8313	56
Installing adapters in Types 8307, 8308, 8310, 8311, 8314, and 8315	57
Installing internal drives	58
Types 8301 and 8302	58
Types 8303, 8304, and 8312	59
Installing internal drives in Types 8305, 8306, 8309, and 8313	62
Installing internal drives in Types 8307, 8308, 8310, 8311, 8314, and 8315	65
Installing a rope clip	70
Types 8303, 8304, and 8312	70
Installing a rope clip in Types 8305, 8306, 8309, and 8313	70
Installing a rope clip in Types 8307, 8308, 8310, 8311, 8314, and 8315	71
Changing the battery	73
Replacing the cover and connecting the cables	73
Types 8303, 8304, and 8312	73
Types 8305, 8306, 8309, and 8313	74
Types 8307, 8308, 8310, 8311, 8314, and 8315	74
Chapter 6. FRU Removals	77
Removing the cover Types 8301 and 8302	77
Removing the CD-ROM drive Types 8301 and 8302	77
Front bezel Types 8307, 8308, 8310, 8311, 8314, and 8315	78
Replacing a microprocessor	78
Hard disk drive removal	79
Types 8303, 8304, and 8312	79
Drive specifications	79
Installing a drive	79
Types 8305, 8306, 8309, and 8313	80
To connect an additional IDE hard disk drive	82
Types 8307, 8308, 8310, 8311, 8314, and 8315	83
Power supply removal	83
Types 8301 and 8302	83
Types 8303, 8304, and 8312	84
Types 8305, 8306, 8309, and 8313	85
Types 8307, 8308, 8310, 8311, 8314, and 8315	86
System board removal	86
Types 8301 and 8302	86
Types 8303, 8304, and 8312	87
Types 8305, 8306, 8309, and 8313	88
Types 8307, 8308, 8310, 8311, 8314, and 8315	89
Replacing the cover, Types 8301 and 8302	89
Chapter 7. Symptom-to-FRU Index	93
Hard disk drive boot error	93
Power Supply Errors	93
Diagnostic error codes	95
Beep symptoms	113
No-beep symptoms	115
POST error codes	116
Miscellaneous error messages	131
Undetermined problems	133
Chapter 8. Parts listing	135
Chapter 9. Additional Service Information	269
Security features	269
Passwords	269
Power-on password	269
Removing a power-on password	269
Administrator password	269
Administrator password control	270
Operating system password	270
Vital product data	270
Management Information Format (MIF)	270
Alert on LAN	271
BIOS levels	271
Flash update procedures	271
Flash from Operating System (WinPhlash)	272
Flash from CD-ROM ISO image	272
Flash recovery boot block jumper	273
Power management	275
Automatic configuration and power interface (ACPI) BIOS	275
Advanced Power Management	275
Automatic Hardware Power Management features	275
Setting Automatic Hardware Power Management features	275
Automatic Power-On features	276
Chapter 10. Related service information	277
Safety information	277
General safety	277
Electrical safety	278
Safety inspection guide	279
Handling electrostatic discharge-sensitive devices	280
Grounding requirements	281
Safety notices (multi-lingual translations)	281
Send us your comments!	310
Problem determination tips	311
Notices	311