Lenovo P585 Laptop User Guide - ideapad-P580,P585,N580,N581,N585,N586 - Page 46
System Memory, Turn the computer on.
View all Lenovo P585 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Appendix A. CRU instructions 8 Push the DDR3 SDRAM inward toward the socket until the latches on both edges of the socket are pushed into the closed position. 2 1 9 After aligning the attachment clips with their matching gaps, reinstall the compartment cover. 0 Reinstall and tighten the screws. A Reinstall the battery. B Turn the computer over again. Connect the AC adapter and the cables to the computer again. Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot). b a To make sure that the DDR3 SDRAM is installed correctly, do as follows: 1 Turn the computer on. 2 Hold F2 during startup. The BIOS setup utility screen opens. The System Memory item shows the total amount of memory installed in your computer. 42