Lenovo ThinkCentre M58 Hardware Maintenance Manual - Page 58
Diagnostic Error Code, System Configuration/Setup error - reviews
View all Lenovo ThinkCentre M58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Diagnostic Error Code 001-027-XXX System Configuration/Setup error 001-032-XXX System Device Controller failure 001-034-XXX System Device Buffer Allocation failure 001-035-XXX System Device Reset condition detected 001-036-XXX System Register error 001-038-XXX System Extension failure 001-039-XXX System DMI data structure error 001-040-XXX System IRQ failure 001-041-XXX System DMA failure 001-195-XXX System Test aborted by user 001-196-XXX System test halt, error threshold exceeded 001-197-XXX System test warning 001-198-XXX System test aborted 001-199-XXX System test failed, cause unknown 001-250-XXX System ECC error 001-254-XXX 001-255-XXX 001-256-XXX 001-257-XXX System DMA error 001-260-XXX 001-264-XXX System IRQ error FRU/Action 1. Run Setup 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 3. System board System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 3. Run memory test 4. System board System board System board 1. Adapter card 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 1. Power-off/on system and re-test 2. System board 1. Power-off/on system and re-test 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 43 2. Flash the system and retest. See "Updating (flashing) BIOS from a disc" on page 560 3. Go to "Undetermined problems" on page 69 1. Go to "Undetermined problems" on page 69 2. Flash the system and re-test 3. Replace component under function test System board System board System board 50 ThinkCentre Hardware Maintenance Manual