Lenovo ThinkCentre M58p Hardware Maintenance Manual - Page 70
Voltage Sensors Test Passed, Microprocessor Test Passed
View all Lenovo ThinkCentre M58p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Diagnostic Error Code 086-197-XXX Mouse Port interface test warning 086-198-XXX Mouse Port interface test aborted 086-199-XXX Mouse Port interface test failed, cause unknown 089-000-XXX Microprocessor Test Passed 089-XXX-XXX Microprocessor failure 089-195-XXX Microprocessor Test aborted by user 089-196-XXX Microprocessor test halt, error threshold exceeded 089-197-XXX Microprocessor test warning 089-198-XXX Microprocessor test aborted 089-199-XXX Microprocessor test failed, cause unknown 170-000-XXX Voltage Sensor(s) Test Passed 170-0XX-XXX Voltage Sensor(s) failure 170-195-XXX Voltage Sensor(s) Test aborted by user 170-196-XXX Voltage Sensor(s) test halt, error threshold exceeded FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 43 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 560 3. Go to "Undetermined problems" on page 69 1. See "Undetermined problems" on page 69 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 560 3. Replace component under function test No action 1. Microprocessor(s) 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. Go to "Undetermined problems" on page 69 1. See "Undetermined problems" on page 69 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 560 3. Replace component under function test No action 1. Flash system 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 62 ThinkCentre Hardware Maintenance Manual