Lenovo ThinkCentre M75e Hardware Maintenance Manual - Page 135
hard disk drive from the drive bay assembly and disconnect the signal cable and the power cable
View all Lenovo ThinkCentre M75e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
2. Remove the computer cover. See "Removing the computer cover" on page 106. 3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 107. 4. Note the location of the four screws 1 that secure the hard disk drive. Then, pivot the drive bay assembly upward. Figure 67. Pivoting the drive bay assembly 5. Hold the hard disk drive and remove the four screws that secure the hard disk drive. Then, remove the hard disk drive from the drive bay assembly and disconnect the signal cable and the power cable from the rear of the hard disk drive to completely remove it from the chassis. Figure 68. Removing the hard disk drive Chapter 9. Replacing FRUs (Machine Types: 4163, 5042, 5046, 5052, 5054, 5056, 5058, 5060, 5062, 5064, and 5066.) 129