Lenovo ThinkPad 385D HMM ThinkPad 380XD,385XD (May 1998) - Page 44
Hibernation Mode, ThinkPad Configration program.
View all Lenovo ThinkPad 385D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Notes: 1. To disable suspend mode, set the mode to "Will not suspend even if LCD is closed." in the ThinkPad Configration program. 2. If the computer is being powered by ac power and a communication PC Card is being used, the computer enters standby mode instead of entering the normal suspend mode, and the PC Card and application programs remain active. 3. The computer will not enter suspend mode when a communication link is active. The following events cause the computer to return from suspend mode to normal operation: The LCD is opened. The real time clock alarm is signaled. The ring indicator (RI) is signaled by a serial device or a PC Card device. The Fn key is pressed. An external keyboard key is pressed while the computer is operating with ac power. The computer exits suspend mode and enters hibernation mode when a preset timer condition is satisfied. Hibernation Mode: In hibernation mode, the following occurs: The system status, RAM, VRAM, and setup data are stored on the hard disk. The computer is powered off. Notes: The computer cannot enter hibernation mode if it is being powered by ac power and a communication PC Card is used. The following events cause the computer to enter hibernation mode: Hibernation mode is requested by the Fn key (Fn+F12). Timer conditions are satisfied in suspend mode. A critically low battery condition occurs. The PS2 HIBernation command is set in the ThinkPad Configration program. The computer exits hibernation mode and resumes operation when the power-on switch is pressed. When power is turned on, the hibernation file in the boot record on the hard disk drive is read and system status is restored from the hard disk drive. 36 IBM ThinkPad 380XD, 385XD