Lenovo ThinkPad 385D HMM ThinkPad 380XD,385XD (May 1998) - Page 95
System Board and PC Card Slot, Fan Assembly/CPU Card
View all Lenovo ThinkPad 385D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
1130 System Board and PC Card Slot 1. The system unit serial number must be restored when the system board is replaced. To restore the system unit serial number, select the option "Set system identification" on the maintenance diskette. The flash ROM on the system board contains the vital product data (VPD)-that is, the system unit serial number, system board serial number, and other computer-unique data. 2. Do not turn off the computer while restoring the VPD. The system unit serial number label is attached to the base cover. 3. Before removing and replacing the system board assembly, make sure that the PC Cards are removed and the eject buttons are not sticking out. If the PC Card eject buttons are sticking out, pull them further out slightly and fold them to the right; then push up the system board assembly from the bottom. Battery Pack (1020) Keyboard Unit (1040) CD-ROM and Diskette Drive Assembly (1060) LCD Unit (1080) Fan Assembly/CPU Card (1090) Upper Shield Case (1100) Pay attention to the connectors that tend to catch in the cover. Step Size (Quantity) Torque 1 M 2.5 x 6 mm, nylon-coated (2) 3-4 kgcm Note: Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screws are tightened firmly. IBM ThinkPad 380XD, 385XD (2635) 87