Lenovo ThinkPad T40 English - Setup Guide for ThinkPad T40 - Page 6

Pivot the SO-DIMM downward until it snaps into place., If the SO-DIMM is already in the memory slot

Get Lenovo ThinkPad T40 PDF manuals and user guides View all Lenovo ThinkPad T40 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

If the SO-DIMM is already in the memory slot, remove it to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save it for future use. 5. Find the notch on the side of the SO-DIMM. Attention: To avoid damaging the SO-DIMM, do not touch its contact edge. 6. With the notched end of the SO-DIMM toward the right side of the socket, insert the SO-DIMM into the socket at an angle of about 20 degrees 1 ; then press it firmly 2 . 7. Pivot the SO-DIMM downward until it snaps into place. 8. Make sure that the card is firmly fixed in the slot and does not move easily. 9. Replace the memory slot cover by aligning the back side of the cover first and then tightening the screw. Attention: When you have added or upgraded a memory card, do not use your computer until you have closed the memory slot cover. Never use the computer with the cover open. 10. Put the battery back in place, turn the computer over again and reconnect the cables. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
If the SO-DIMM is already in the memory slot, remove it to make room for the
new one by pressing out on the latches on both edges of the socket at the same
time. Be sure to save it for future use.
5.
Find the notch on the side of the SO-DIMM.
Attention:
To avoid damaging the SO-DIMM, do not touch its contact edge.
6.
With the notched end of the SO-DIMM toward the right side of the socket, insert
the SO-DIMM into the socket at an angle of about 20 degrees
±1²
; then press it
firmly
±2²
.
7.
Pivot the SO-DIMM downward until it snaps into place.
8.
Make sure that the card is firmly fixed in the slot and does not move easily.
9.
Replace the memory slot cover by aligning the back side of the cover first and then tightening the screw.
Attention:
When you have added or upgraded a memory card, do not use your computer until you have closed the memory
slot cover. Never use the computer with the cover open.
10.
Put the battery back in place, turn the computer over again and reconnect the cables.
6