Lenovo ThinkPad T410s Hardware Maintenance Manual - Page 53
Load Setup Defaults in BIOS Setup Utility.
View all Lenovo ThinkPad T410s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Table 2. Numeric error codes (continued) Symptom or error 0250 System battery error-System battery is dead. 0251 System CMOS checksum bad- Default configuration used. 0252 Password checksum bad-The password is cleared. 0260 System timer error. 0270 Real-time clock error. 0271 Date and time error-Neither the date nor the time is set in the computer. 0280 Previous boot incomplete- Default configuration used. 02B2 Incorrect drive A type. 02D0 System cache error. 02F0 CPU ID:xx Failed. 02F4 EISA CMOS not writable. 02F5 DMA test failed. 02F6 Software NMI failed FRU or action, in sequence 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utilityto reset the time and date. Reset the password by running BIOS Setup Utility. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utilityto reset the time and date. 3. System board. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utilityto reset the time and date. 3. System board. Run BIOS Setup Utility to reset the time and date. 1. Load "Setup Default" in BIOS Setup Utility. 2. DIMM. 3. System board. 1. Diskette drive. 2. External FDD cable. 3. I/O card. 1. CPU. 2. System board. 1. Load Setup Defaults in BIOS Setup Utility. 2. Replace the backup battery. 3. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. Chapter 4. Related service information 47