Lenovo ThinkPad X140e (English) User Guide - Page 99
boldface, IPv4 First
View all Lenovo ThinkPad X140e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
• Default values are in boldface. Table 4. Config menu items Menu item Submenu item Network Wake On LAN Selection • Disabled • AC Only • AC and Battery Ethernet LAN Option ROM (for Legacy Only boot mode or Both with Legacy first) • Disabled • Enabled UEFI IPv4 Network Stack (for UEFI Only boot mode or Both with UEFI first) • Disabled • Enabled UEFI IPv6 Network Stack (for UEFI Only boot mode or Both with UEFI first) UEFI PXE Boot Priority (for Both with UEFI first boot mode, and IPv6 and IPv4 stacks are both enabled.) Wireless LAN Radio • Disabled • Enabled • IPv6 First • IPv4 First • On • Off Comments Enable the system to power on when the Ethernet controller receives a magic packet. If you select AC Only, the Wake on LAN function is enabled only when the ac power adapter is attached. If you select AC and Battery, the Wake on LAN function is enabled with any power sources. Notes: • The magic packet type Wake on LAN requires ac power. • The Wake on LAN function does not work when a hard disk password is set. Configure whether to load the Ethernet LAN Option ROM to enable startup from an integrated network device. This option must be enabled to display the MAC Address for the integrated network device. Enable or disable Internet Protocol Version 4 (IPv4) network stack for UEFI environment. Enable or disable Internet Protocol Version 6 (IPv6) network stack for UEFI environment. Select network stack priority for UEFI PXE boot. If you select On, the internal wireless radio is turned on. If you select Off, the internal wireless radio is turned off. Chapter 7. Advanced configuration 83