Lenovo ThinkServer RD350 (English) User Guide and Hardware Maintenance Manual - Page 58

Configuring the TPM function, Setting an Ethernet connector for system management

Get Lenovo ThinkServer RD350 PDF manuals and user guides View all Lenovo ThinkServer RD350 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

3. Press F10 to save settings and exit the Setup Utility program. The server will follow the startup device sequence you have set each time you turn on the server. Configuring the TPM function The TPM works as a hardware security solution to help you to encrypt data and protect the server. The TPM function is only available when there is a TPM installed in your server. See "Installing the TPM" on page 67. You can purchase a TPM from the Lenovo Web site at: http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server After installing a TPM, check if the TPM function is enabled in the Setup Utility program. To enable the TPM function in the Setup Utility program, do the following: 1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 39. 2. On the System Security menu, select TPM Settings ➙ TPM Support. 3. Do one of the following: • If TPM Support is set to Enabled, the TPM Security Feature item is displayed. Set TPM Security Feature to Activate. • If TPM Support is set to Disabled, do the following: a. Set TPM Support to Enabled and press F10 to save settings and exit the Setup Utility program. The server will restart. b. Start the Setup Utility program. On the System Security menu, select TPM Settings. Then, set TPM Security Feature to Activate. 4. Press F10 to save settings and exit the Setup Utility program. The server will restart to enable the TPM function. Setting an Ethernet connector for system management There are three RJ-45 Ethernet connectors on the rear of the server. The Ethernet connector 0 is for system management by default. However, you also can set the Ethernet connector 1 for system management use. To locate the three Ethernet connectors, see "Rear view of the server" on page 20. To set the Ethernet connector for system management, do the following: 1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 39. 2. On the TSM Settings menu, select TSM Network Settings ➙ TSM NIC Selection. 3. Do one of the following: • To set the Ethernet connector 0 for system management, select Dedicated Port. • To set the Ethernet connector 1 for system management, select Shared NIC Port. 4. Press F10 to save settings and exit the Setup Utility program. Exiting the Setup Utility program After you finish viewing or changing settings, press Esc to return to the Setup Utility program main interface. If you are on a nested submenu, press Esc repeatedly until you reach the main interface. Then, you can do one of the following to exit the Setup Utility program: • If you want to save the new settings and exit the Setup Utility program, press F10 or select Save & Exit ➙ Save Changes and Reset. Otherwise, your changes will not be saved. • If you do not want to save the new settings, select Save & Exit ➙ Discard Changes and Exit. • If you want to return to the default settings, press F9 or select Save & Exit ➙ Load Optimized Defaults. 44 ThinkServer RD350 User Guide and Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
3.PressF10tosavesettingsandexittheSetupUtilityprogram.Theserverwillfollowthestartupdevice
sequence you have set each time you turn on the server.
Configuring the TPM function
TheTPMworksasahardwaresecuritysolutiontohelpyoutoencryptdataandprotecttheserver.TheTPM
functionisonlyavailablewhenthereisaTPMinstalledinyourserver.See“InstallingtheTPM”onpage67.
YoucanpurchaseaTPMfromtheLenovoWebsiteat:
http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server
AfterinstallingaTPM,checkiftheTPMfunctionisenabledintheSetupUtilityprogram.
ToenabletheTPMfunctionintheSetupUtilityprogram,dothefollowing:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 39.
2. On the
System Security
menu, select
TPM Settings
➙
TPM Support
.
3. Do one of the following:
• If
TPM Support
issetto
Enabled
,the
TPM Security Feature
item is displayed. Set
TPM Security
Feature
to
Activate
.
• If
TPM Support
is set to
Disabled
, do the following:
a. Set
TPM Support
to
Enabled
andpressF10tosavesettingsandexittheSetupUtilityprogram.
The server will restart.
b. Start the Setup Utility program. On the
System Security
menu,select
TPM Settings
. Then, set
TPM Security Feature
to
Activate
.
4. Press F10 to save settings and exit the Setup Utility program. The server will restart to enable the
TPM function.
Setting an Ethernet connector for system management
TherearethreeRJ-45Ethernetconnectorsontherearoftheserver.TheEthernetconnector0isforsystem
managementbydefault.However,youalsocansettheEthernetconnector1forsystemmanagementuse.
TolocatethethreeEthernetconnectors,see“Rearviewoftheserver”onpage20.
TosettheEthernetconnectorforsystemmanagement,dothefollowing:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 39.
2. On the
TSM Settings
menu,select
TSM Network Settings
➙
TSM NIC Selection
.
3. Do one of the following:
• To set the Ethernet connector 0 for system management, select
Dedicated Port
.
• To set the Ethernet connector 1 for system management, select
Shared NIC Port
.
4. Press F10 to save settings and exit the Setup Utility program.
Exiting the Setup Utility program
Afteryoufinishviewingorchangingsettings,pressEsctoreturntotheSetupUtilityprogrammaininterface.
Ifyouareonanestedsubmenu,pressEscrepeatedlyuntilyoureachthemaininterface.Then,youcando
one of the following to exit the Setup Utility program:
•IfyouwanttosavethenewsettingsandexittheSetupUtilityprogram,pressF10orselect
Save&Exit
➙
Save Changes and Reset
. Otherwise, your changes will not be saved.
• If you do not want to save the new settings, select
Save & Exit
➙
Discard Changes and Exit
.
• If you want to return to the default settings, press F9 or select
Save & Exit
➙
LoadOptimizedDefaults
.
44
ThinkServer RD350 User Guide and Hardware Maintenance Manual