Lenovo ThinkServer TD350 (English) User Guide and Hardware Maintenance Manual - Page 180

5. Lock the cover lock 2 and cover-handle lock 1 . Figure 132. Locking the cover lock and the cover-handle lock 6. Reconnect external cables and power cords to the server. See "Rear view of the server" on page 22 to identify the connectors on the rear panel of the server. Attention: To avoid component damage, connect the power cords last. Note: In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will come with the CRU or will come a few days after the CRU arrives. Updating the server configuration When you turn on the server for the first time after you install, remove, or replace a device, you might need to update the server configuration. Some optional devices have device drivers that you must install. For information about installing device drivers, use the documentation that comes with each optional device. To obtain the supported device drivers for your server from the Lenovo Support Web site, go to http://www.lenovo.com/support. Then, follow the instructions on the Web page to find and download the device drivers you need. Refer to the following information resources to update the server configuration: • To update the BIOS configuration, see "Using the Setup Utility program" on page 51. • To update the RAID configuration, see "Configuring RAID" on page 58. • To use the Lenovo ThinkServer Deployment Manager program, see "Lenovo ThinkServer Deployment Manager" on page 14. • To update your system firmware, see "Updating the firmware" on page 61. 166 ThinkServer TD350 User Guide and Hardware Maintenance Manual