Lenovo ThinkVision E2323s 23-inch FHD WLED Backlit LCD Monitor ThinkVision E23 - Page 23

Manually installing the monitor driver, Installing the monitor driver in Windows 7

Page 23 highlights

Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 8, Microsoft Windows 8.1. Installing the monitor driver in Windows 7 To use the Plug and Play feature in Microsoft Windows 7, do the following: Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows 7. 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 7 operating system. 4. Open the Display Properties window by clicking Start, Control Panel and Hardware and Sound icon. and then clicking the Display icon. 5. Click the Change the display settings tab. 6. Click the Advanced Settings icon. 7. Click the Monitor tab. 8. Click the Properties button. 9. Click the Driver tab. 10. Click Update Driver, then click Browse my computer for driver software. 11. Select Let me pick from a list of device drivers on my computer. 12. Click the Have Disk button. Click the Browse button and navigate to the following directory: X:\Monitor Drivers (where X is the drive letter designator for the CD-ROM drive). 13. Select the "lene2323swa.inf" file and click the Open button. Click the OK button. 14. Select LENE2323swA and click Next. The files will be copied from the CD to your hard disk drive. 15. Close all open windows and remove the CD. 16. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles. Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz. © Copyright Lenovo 2013. © Chapter 3. 3-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 8, Microsoft Windows 8.1.
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
Note: You must download file from the Reference and Driver CD to use the Plug and Play
feature in Windows 7.
1.
Turn off the computer, all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.
4.
Open the Display Properties window by clicking Start, Control Panel and Hardware
and Sound icon. and then clicking the Display icon.
5.
Click the Change the display settings tab.
6.
Click the Advanced Settings icon.
7.
Click the Monitor tab.
8.
Click the Properties button.
9.
Click the Driver tab.
10.
Click Update Driver, then click Browse my computer for driver software.
11.
Select Let me pick from a list of device drivers on my computer.
12.
Click the Have Disk button. Click the Browse button and navigate to the following
directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).
13.
Select the
"lene2323swa.inf"
file and click the Open button. Click the OK button.
14. Select
LENE2323swA
and click Next. The files will be copied from the CD to your
hard disk drive.
15.
Close all open windows and remove the CD.
16.
Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
© Copyright Lenovo 2013. ©
Chapter 3.
3-4