Lenovo U31-70 Laptop Hardware Maintenance Manual - Lenovo U31-70 - Page 52
System board, Important notices for handling the system board
View all Lenovo U31-70 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
U31-70 Hardware Maintenance Manual 1090 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • During the whole process, make sure not to drop or stack the system board. • If you put a system board down, make sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. For access, remove these FRUs in order: • "1010 Base cover" on page 32 • "1020 Battery pack" on page 34 • "1030 PCI Express Mini Card for wireless LAN" on page 36 • "1050 Speakers" on page 39 • "1060 Hard disk drive" on page 40 • "1070 Fan assembly and Heat Sink assembly" on page 42 • "1080 IO board, DC-in cable" on page 46 Figure 9. Removal steps of system board Disconnect the three connectors in the directions shown by arrows 1, 2 and 3. Then remove the screws 4 and 5. 4 5 1 5 2 3 5 2 3 Step Screw (quantity) 4 M2 × 4 mm, Phillips-head, nylok-coated (1) M/B---log up 5 M2 × 2.5 mm, Phillips-head, nylok-coated (3) M/B---log up Color Torque Black 1.0~1.5 kgf*cm Silver 1.0~1.5 kgf*cm 48