Lenovo Y50-70 Touch Hardware Maintenance Manual - Lenovo Y40 50 Series - Page 65
M2.0 × 3.0 mm, flat-head, nylok-coated 6, RJ45 FRAME to MB & M/B TO Logic UP Y50-70
View all Lenovo Y50-70 Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Lenovo Y40-70/Y40-80/Y50-70/Y50-80/Y50-70 Touch/ Y50-80 Touch Figure 10. Removal steps of system board (continued) Y50-70/Y50-80/Y50-70 Touch/Y50-80 Touch Disconnect the connectors in the direction shown by arrows 1, 2 and 3. Remove the screws 4. Step Screw (quantity) Color Torque 4 M2.0 × 3.0 mm, flat-head, nylok-coated (6) Sliver 2.0 kgf*cm RJ45 FRAME to MB & M/B TO Logic UP (Y50-70/ Y50-80/Y50-70 Touch/Y50-80 Touch) When installing: Make sure that the connectors are attached firmly. Remove the RJ-45 door and the system board 5. 61
61
Lenovo Y40-70/Y40-80/Y50-70/Y50-80/Y50-70 Touch/ Y50-80 Touch
Figure 10. Removal steps of system board (continued)
Y50-70/Y50-80/Y50-70 Touch/Y50-80 Touch
Disconnect the connectors in the direction shown by arrows
1
,
2
and
3
.
Remove the screws
4
.
³
³
³
³
²
±
²
±
²
±
²
±
±
´
±
Step
Screw (quantity)
Color
Torque
4
M2.0 × 3.0 mm, flat-head, nylok-coated (6)
RJ45 FRAME to MB & M/B TO Logic UP (Y50-70/
Y50-80/Y50-70 Touch/Y50-80 Touch)
Sliver
2.0 kgf*cm
When installing:
Make sure that the connectors are attached firmly.
Remove the RJ-45 door and the system board
5
.
³
³