LevelOne EAP-200 Manual - Page 52
RADIUS Server Settings Primary/Secondary
View all LevelOne EAP-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
802.11 Authentication: Select from Open System, Shared Key, or Auto. WEP Key Length: Select from 64-bit, 128-bit, 152-bit key length. WEP Key Format: Select from ASCII or Hex format for the WEP key. WEP Key Index: Select a key index from 1~4. The WEP key index is a number that specifies which WEP key will be used for the encryption of wireless frames during data transmission. WEP Keys: Provide the pre-defined WEP key value; the system supports up to 4 sets of WEP keys. • 802.1X: When 802.1X Authentication is selected, RADIUS authentication and Dynamic WEP are provided. Security Settings: 802.1X Authentication Dynamic WEP Settings: o Dynamic WEP: For 802.1X security type, Dynamic WEP is always enabled to automatically generate WEP keys for encryption. o WEP Key Length: Select from 64-bit or 128-bit key length. o Re-keying Period: The time interval for the dynamic WEP key to be updated; the time unit is in second. RADIUS Server Settings (Primary/Secondary): o Host: Enter the IP address or domain name of the RADIUS server. o Authentication Port: The port number used by the RADIUS server. Specify a port number or use the default, 1812. o Secret Key: The secret key for the system to communicate with the RADIUS server. o Accounting Service: Enabling this option allows accounting of login and logouts through the RADIUS server. 52