LevelOne EAP-200 Manual - Page 9

Hardware Installation

Get LevelOne EAP-200 PDF manuals and user guides View all LevelOne EAP-200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

2.4 Hardware Installation Please follow the steps mentioned below to install the hardware of EAP-200: 1. Place the EAP-200 at the best location. The best location for EAP-200 is usually at the center of your intended wireless network. 2. Connect the EAP-200 to your network device. Connect one end of the Ethernet cable to LAN port of EAP-200 and the other end of the cable to a switch, a router, or a hub. EAP-200 is then connected to your existing wired LAN network. 3. There are two ways to supply power over to EAP-200. a) Connect the DC power adapter to the EAP-200 power socket. b) EAP-200 LAN port is capable of transmitting DC currents. Connect an IEEE 802.3af-compliant PSE device (e.g. a PoE-switch) to the LAN port of EAP-200 with the Ethernet cable. Now, the Hardware Installation is complete. • Please only use the power adapter supplied with the EAP-200 package. Using a different power adapter may damage this system. • To double verify the wired connection between EAP-200 and you switch / router / hub, please also check the LED status indicator of the respective network devices. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
9
2.4 Hardware Installation
Please follow the steps mentioned below to install the hardware of EAP-200:
1.
Place the EAP-200 at the best location.
The best location for EAP-200 is usually at the center of your intended wireless network.
2.
Connect the EAP-200 to your network device.
Connect one end of the Ethernet cable to LAN port of EAP-200 and the other end of the cable to a
switch, a router, or a hub.
EAP-200 is then connected to your existing wired LAN network.
3.
There are two ways to supply power over to EAP-200.
a)
Connect the DC power adapter to the EAP-200 power socket.
b)
EAP-200 LAN port is capable of transmitting DC currents. Connect an IEEE 802.3af-compliant
PSE device (e.g. a PoE-switch) to the LAN port of EAP-200 with the Ethernet cable.
Now, the Hardware Installation is complete.
•
Please only use the power adapter supplied with the EAP-200 package.
Using a different
power adapter may damage this system.
•
To double verify the wired connection between EAP-200 and you switch / router / hub, please
also check the LED status indicator of the respective network devices.