LevelOne FCS-5058 User Manual - Page 12
Creating a Password
View all LevelOne FCS-5058 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
User Manual of Network Camera Refer to the Figure 2-2 to set network camera over the LAN via a switch or a router. Figure 2-1 Connecting Directly Figure 2-2 Connecting via a Switch or a Router 2.1.2 Creating a Password You are required to activate the camera first by setting a strong password for it before you can use the camera. Creating a Password via Web Browser, Creating a Password via SADP, and Creating a Password via Client Software are all supported. Creating a Password via Web Browser Steps: 1. Power on the camera, and connect the camera to the network. 2. Input the IP address into the address bar of the web browser, and click Enter to enter the activation interface. Notes: The default IP address of the camera is 192.168.1.64. For the camera enables the DHCP by default, the IP address is allocated automatically. And you need to activate the camera via SADP software. Please refer to the following chapter for Activation via SADP. 12