LevelOne FCS-5058 User Manual - Page 155
RS-232 Settings
View all LevelOne FCS-5058 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
User Manual of Network Camera 11.7.4 Upgrading the System Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance , or Configuration > Advanced Configuration> System > Maintenance 2. Select firmware or firmware directory to locate the upgrade file. Firmware: Locate the exact path of the upgrade file. Firmware Directory: Only the directory the upgrade file belongs to is required. 3. Click Browse to select the local upgrade file and then click Upgrade to start remote upgrade. Figure 11-15 Remote Upgrade Note: The upgrading process will take 1~10 minutes. Please don't disconnect power of the camera during the process, and the camera reboots automatically after upgrade. 11.8 RS-232 Settings The RS-232 port can be used in two ways: Parameters Configuration: Connect a computer to the camera through the serial port. Device parameters can be configured by using software such as HyperTerminal. The serial port parameters must be the same as the serial port parameters of the camera. Transparent Channel: Connect a serial device directly to the camera. The serial device will be controlled remotely by the computer through the network. Steps: 1. Enter RS-232 Port Setting interface: Configuration> Advanced Configuration> System > RS232 155