LevelOne GEL-2461 Manual - Page 12
Hardware Installation
View all LevelOne GEL-2461 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 2 Hardware Installation Chapter 2 Hardware Installation 2.1 Installation Requirements Before you install the Switch, observe the following guidelines: Make sure that the Switch is powered off. Make sure that the workbench or rack is level and stable. Do not place heavy objects on the Switch. Make sure that there is proper heat dissipation and adequate ventilation around the Switch. Position the Switch in a dry environment Position the Switch out of direct sunlight and away from sources of heat and ignition Position the Switch away from sources of electrical noise, such as high power radio transmitters, radar stations, and so on. 2.2 Installing the Switch You can install the Switch in a 19-inch standard rack; or on a level surface such as a desktop or shelf if you don't have a 19-inch standard rack. 2.2.1 Installing the Switch in a 19-inch Rack To install the Switch in a 19-inch rack (see Figure 2-1), follow these steps: Step 1 Attach the two L-shaped brackets to the sides of the Switch with the supplied screws and secure them tightly. Step 2 Position the Switch into the rack and use the supplied screws to secure it in the rack. http://www.level1.com Page 5