LevelOne GTL-2660 Manual - Page 46

Maintenance

Get LevelOne GTL-2660 PDF manuals and user guides View all LevelOne GTL-2660 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Chapter 3 WEB Management 3.6 Maintenance 3.6.1 Restart Device Page Wizard: Maintenance-> Restart Device On this page, you can restart the switch. If you are sure to reboot the device, please click "Yes" button. Figure 3-39 Restart Device 3.6.2 Factory Defaults Page Wizard: Maintenance-> Factory Defaults In this page, you can restore the switch to its factory configuration. If you determine to restore the device to its factory configuration, please click "Yes" button, and reset the configuration to take effect immediately, but need not to restart it. The factory default management IP address of the switch is: 192.168.1.1. Figure 3-40 Factory Defaults Note: Restoring the factory defaults may also be looped back to Port 1 and Port 2 physically within the first one minute after the switch restarts Within the first one minute after startup, the "Echo" packet will be sent to Port 1, and if Port 2 also receives the "Echo" packet, the switch will restore to its factory defaults. 3.6.3 Firmware Update Page Wizard: Maintenance-> Firmware Update In this page, you can upgrade firmware for the switch. Figure 3-41 Firmware Update http://www.level1.com Page 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Chapter 3
WEB Management
Page 40
3.6
Maintenance
3.6.1
Restart Device
Page Wizard: Maintenance
—
> Restart Device
On this page, you can restart the switch. If you are sure to reboot the device, please
click "Yes" button.
Figure 3-39 Restart Device
3.6.2
Factory Defaults
Page Wizard: Maintenance
—
>
Factory Defaults
In this page, you can restore the switch to its factory configuration. If you determine to
restore the device to its factory configuration, please click "Yes" button, and reset the
configuration to take effect immediately, but need not to restart it. The factory default
management IP address of the switch is: 192.168.1.1.
Figure 3-40 Factory Defaults
Note: Restoring the factory defaults may also be looped back to Port 1 and Port 2
physically within the first one minute after the switch restarts Within the first one minute
after startup, the "Echo" packet will be sent to Port 1, and if Port 2 also receives the
"Echo" packet, the switch will restore to its factory defaults.
3.6.3
Firmware Update
Page Wizard: Maintenance
—
> Firmware Update
In this page, you can upgrade firmware for the switch.
Figure 3-41 Firmware Update