LevelOne GVS-3800 Manual - Page 24
Flow Control, Ingress Rate Limit and Egress Rate Limit
View all LevelOne GVS-3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
available for Fast Ethernet. If the media is fiber, it is always 100Mbps and the duplex is 100full/auto; if the media is TP, the Speed/Duplex is comprised of the combination of speed mode, 10/100Mbps, and duplex mode, full duplex and half duplex. Flow Control: There are two modes to choose in flow control, Enable and Disable. If flow control is set "Enable", both parties can send PAUSE frame to the transmitting device(s) while the receiving port is too busy to handle. When it is set "Disable", flow control will not exist in the port. It drops the packet if too much to handle. Default: Enable Ingress Rate Limit and Egress Rate Limit: There are some predefined rate settings. If user needs some special usage, you could input the rate by yourself after "User Setting" has been selected from pull down list. Because the rate limit is 64kbps as a minimal step, the input rate limit, it should be divided exactly by 64. If the rate value can not be divided exactly by 64, for example 65, the program will be change the rate to 64 automatically. Default: Not Limit 18