LevelOne HVE-6501R Manual - Page 12
How to Use RS232 over IP
View all LevelOne HVE-6501R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
EDID usage. During multicast setup, there maybe monitor/TV that has lower resolution. For example, 1 monitor/TV with 720p resolution with mostly 1080p solutions. Please select the monitor/TV with lowest resolution, to ensure all can be displayed correctly. For customer that are using 1 pair of Host/Client with Multicast mode, the end user must update EDID correctly. If not, it will cause many compatibility issue. Operation: Once the button event is triggered correctly at the client side, when system is setup correctly for Multicast. The selected EDID will be update to Host Side EEPROM. Firmware Upgrade Mode Reset to Default 1. Static IP: 192.168.0.88 2. User can connect to http://192.168.0.88 webpage for firmware update. 3. Firmware update file name will be: Host :webfwh.bin Client :webfwc.bin 1. Reset Any changes in SPI flash setup flag. 2. After Reset to Default and reboot cycle, will use default setting. How to Use RS232 over IP HVE-650/660 series support a feature called "RS232 over IP". This feature redirects RS232 data from client/host to host/client. the RS232 redirection is automatically established between host and clients. There is no need to explicitly issue commands for establishing redirection. The FW code will automatically link the host and clients all together using a pre-configured baudrate setting (default is 9600-8n1). Normally, this static baudrate setting is pre-configured on Manufacturing. Also you can change baudrate setting by Link Utility, you can refer to next chapter.