LevelOne HVE-6601T Manual - Page 10

HVE-6601 Receiver Video Wall

Get LevelOne HVE-6601T PDF manuals and user guides View all LevelOne HVE-6601T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

 HVE-6601 Receiver (Video Wall) 1. DC5V: Connect to the supplied AC adapter and plug into an electrical outlet. 2. GIGA LAN: Connect directly to a Transmitter or to a GIGA(1000Mbps) Ethernet Switch using CAT6 cable. 3. HDMI OUT: Connect to an HDMI display device with an HDMI M-M cable. Use an HDMI --> DVI adapter if the display is DVI. 4. RS232: Connect to the RS232 port of the device you want to configure. In Video Wall system solutions it will not be used. 1. POWER LED Blinking: power on and the unit is booting up. 2. POWER LED On: power on and the unit is active. 3. LINK LED Off: LAN is not connected. 4. LINK LED On: LAN is connected. 5. DATA LED Blinking: The Receiver is connecting with Transmitter, or the HDMI source is removed. 6. DATA LED On: All the connections are working. 7. PB 1 : Change OSD shows control/Column position; Firmware Upgrade Mode and Reset to default* using this button. Please to see the Push Button Descriptions. 8. PB 2 : change between Video Mode / Graphic Mode ; Anti-Dither ; Update EDID* using this button. Please to see the Push Button Descriptions. 9. GROUP ID: The default GROUP ID is "0000"

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
HVE-6601 Receiver (Video Wall)
1.
DC5V:
Connect to the supplied AC adapter and plug into an electrical outlet.
2.
GIGA LAN:
Connect directly to a Transmitter or to a GIGA(1000Mbps) Ethernet
Switch using CAT6 cable.
3.
HDMI OUT:
Connect to an HDMI display device with an HDMI M-M cable. Use
an HDMI --> DVI adapter if the display is DVI.
4.
RS232:
Connect to the RS232 port of the device you want to configure. In
Video Wall system solutions it will not be used.
1.
POWER LED Blinking:
power on and the unit is booting up.
2.
POWER LED On:
power on and the unit is active.
3.
LINK LED Off:
LAN is not connected.
4.
LINK LED On:
LAN is connected.
5.
DATA LED Blinking:
The Receiver is connecting with Transmitter, or the HDMI
source is removed.
6.
DATA LED On:
All the connections are working.
7.
PB 1
: Change OSD shows control/Column position; Firmware Upgrade Mode
and Reset to default* using this button. Please to see the
Push Button
Descriptions.
8.
PB 2 :
change between Video Mode / Graphic Mode ; Anti-Dither ; Update
EDID* using this button. Please to see the
Push Button Descriptions.
9.
GROUP ID:
The d
efault GROUP ID is “0000”