LevelOne HVE-6601T Manual - Page 13
Firmware Upgrade Mode
View all LevelOne HVE-6601T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
During multicast setup, there maybe monitor/TV that has lower resolution. For example, 1 monitor/TV with 720p resolution with mostly 1080p solutions. Please select the monitor/TV with lowest resolution, to ensure all can be displayed correctly. For customer that are using 1 pair of Host/Client with Multicast mode, the end user must update EDID correctly. If not, it will cause many compatibility issue. Operation: Once the button event is triggered correctly at the client side, when system is setup correctly for Multicast. The selected EDID will be update to Host Side EEPROM. Firmware Upgrade Mode Reset to Default 1. Static IP: 192.168.0.88 2. User can connect to http://192.168.0.88 webpage for firmware update. 3. Firmware update file name will be: Host :webfwh.bin Client :webfwc.bin 1. Reset Any changes in SPI flash setup flag. 2. After Reset to Default and reboot cycle, will use default setting.