LevelOne IES-0920 Quick Install Guide - Page 1

IES-0920 8 FE + 1 MM SC Unmanaged Switch -40 to 75, DIN-rail Quick Installation Guide v1.00 - 1206 Features  Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and vibration for traffic control equipment.  Meets EN61000-6-2 & EN61000-6-3 EMC Generic Standard Immunity for industrial environment.  Supports 802.3/802.3u/802.3x. Auto-negotiation: 10/100Mbps, full/half-duplex. Auto MDI/MDIX.  100Base-FX: Multi mode/Single mode SC or ST type. 100Base-BX: WDM Multi mode/Single mode SC type.  Supports 2048 MAC addresses. Provides 768K bits memory buffer.  Alarms for power and port link failure by relay output 1.5A @ 24VDC.  Operating voltage and Max. current consumption: 0.76A @ 12VDC, 0.38A @ 24VDC, 0.19A @ 48VDC. Power consumption: 9.12W Max.  Power Supply: Redundant DC Terminal Block power inputs or 12VDC DC JACK with 100-240VAC external power supply.  Field Wiring Terminal: Use Copper Conductors Only, 60/75℃, 12-24 AWG torque value 7 lb-in.  -40℃ to 75℃ (-40℉ to 167℉) operating temperature range. Tested for functional operation @ -40℃ to 85℃ (-40℉ to 185℉). UL1604 Industrial Control Equipment certified Maximum Surrounding Air Temperature @ 74℃ (165℉).  Supports DIN-Rail or Panel Mounting installation.  UL1604 Class I, Division 2 Classified for use in hazardous locations (applicable to versions with terminal block power option). o This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D OR non-hazardous locations only. o WARNING - EXPLOSION HAZARD - Do not disconnect equipment unless power has been removed or the area is known to be non-hazardous. o WARNING - EXPLOSION HAZARD - Substitution of components may impair suitability for Class I, Division 2. Package Contents  IES-0920  Quick Installation Guide  CD User Manual IES-0920 Page 2 Overview LevelOne IES-0920 Industry Ethernet Switch provides 8 ports of 10/100Base-TX Ethernet plus 1 port of 100Base-FX MM SC fiber to enable high speed network at mission-critical environment. This device is designed to be mounted on an industry standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Plug & Play This unmanaged Industrial Ethernet Switch is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or configure required, truly plug and play. IES-0920 Page 1 LED Status LED Status Description PW 1,2 (Green) Steady Off Power On Power Off Fault FAULT (Red) Steady Off  Redundant power is failed or not being used  Port failure (When Port Fault Alarm is enabled)  Redundant power is active  Port failure is not occurred  Port Fault Alarm is disabled 10/100Base-TX or 100Base-FX/BX LNK/ACT (Green) Steady Flashing Network connection is established Transmitting or Receiving data 100 (Yellow) Steady Off Connection at 100Mbps speed Connection at 10Mbps speed IES-0920 Page 3