LevelOne IES-1084 Manual - Page 17
DIN Rail Mounting, Connecting to Power
View all LevelOne IES-1084 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
DIN Rail Mounting Fix the DIN rail attachment plate to the back panel of the Media Converter. Installation: Place the Media Converter on the DIN rail from above using the slot. Push the front of the Media Converter toward the mounting surface until it audibly snaps into place. Removal: Pull out the lower edge and then remove the Media Converter from the DIN rail. Connecting to Power Redundant DC Terminal Block Power Inputs or DC Jack Power Input: 47-57VDC Jack Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside of the switch. Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a standard AC outlet with the appropriate AC voltage. Redundant 47-57VDC DC Terminal Block Power Inputs There are two pairs of power inputs for use with redundant power sources. You only need to have one power input connected to run the switch. Step 1: Connect the DC power cord to the plug-able terminal block on the switch, and then plug it into a standard DC outlet. IES-1084 User Manual Page 17