LevelOne PLI-2040 Manual - Page 4
PLI-2040 Utility - Network Tab
 |
View all LevelOne PLI-2040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
6. Once installation is completed, run the PLI-2040 utility program. The first screen (Network Tab) will display information of the compatible devices found, such as their MAC Addresses and current transfer speeds. Choose the desired device from the Device Selection, and the information of the selected device will be displayed in the table. Figure 2: PLI-2040 Utility - Network Tab 7. Click Close to exit the PLI-2040 utility. Setup is now complete. If your PC is not the device you wish to use with the 200Mbps HomePlug AV Adapter, connect the Ethernet cable from the 200 Mbps HomePlug AV Adapter to the desired device. The 200Mbps HomePlug AV Adapter is now ready for use.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
6. Once installation is completed, run the
PLI-2040
utility program. The first screen (
Network
Tab) will display in-
formation of the compatible devices found, such as their MAC Addresses and current transfer speeds.
Choose the desired device from the
Device Selection
, and the information of the selected device will be dis-
played in the table.
Figure 2: PLI-2040 Utility - Network Tab
7. Click
Close
to exit the
PLI-2040
utility.
Setup is now complete.
If your PC is not the device you wish to use with the 200Mbps HomePlug AV Adapter, connect the Ethernet ca-
ble from the 200 Mbps HomePlug AV Adapter to the desired device.
The 200Mbps HomePlug AV Adapter is now ready for use.