LevelOne WAC-1001 User Manual - Page 30
System
View all LevelOne WAC-1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Figure 6- 10 Setting of service area Service area name: Displays the name of the service area. SSID: Displays the name of wireless network. Type: Displays the application type. Frequency band: Supports two frequency bands, 2.4 G / 5 G, in which ALL means that two frequency bands of the service area will be distributed. VLAN ID: Displays the VLAN value, which is between 1-4094. Address pool: Displays the name of the address pool. For the details of setting the beginning and end address of the address pool, please refer to the chapter: VLAN Settings. 6.2.2.4 System In this interface, the working mode of AP, the way to obtain the IP address of AP and upgrading of the AP software can be set. The AP's working mode is divided into Fit AP and Fat AP. In the Fat AP mode, AC can manage the AP; in the Fat AP mode, the AP can configure independently without AC management. It is recommended to restart your device for the configuration to take effect if the device is to be switched in modes no matter which mode it works under. 1) System settings Figure 6- 11 System settings 26