Lexmark 1000 Color Jetprinter Service Manual - Page 17
Service Checks, Carrier Transport Service Check - driver
View all Lexmark 1000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4096-00X Service Checks Carrier Transport Service Check FRU Action 1 System Board Check the motor for binds, or loose motor pulley. 2 Carrier Transport Motor Turn the printer off and disconnect N6 from the system board. Check for motor pins shorted to the motor housing. If you find a pin shorted to the housing, replace the motor. If the failure remains, replace the system board. A noisy or chattering motor or a motor that fails to turn can be caused by: • An open or short in the motor. • An open or short in the motor driver on the system board. • A bind in the carrier transport mechanism. With the carrier transport motor cable disconnected from the system board, check for zero to ten (0 - 10) ohms between the following pins on the motor: N6-1 and N6-2 N6-3 and N6-4 If the readings are incorrect, replace the motor. 3 Carrier Guide Rod Clean the carrier rod. Note: Lubricate the carrier guide rod and the carrier rod bearing surface with grease P/N 1329301. 4 Carrier Transport Belt Idler Pulley Parts Carrier Frame Check for worn, loose or broken parts. Check for obstructions blocking carrier movement. Carrier to carrier frame engagement should be lubricated with grease P/N 1329301. Diagnostic Information 2-5