Lexmark 1200 Setup Guide - Page 52
Installing the disk, back of the system board. Securely tighten
![]() |
UPC - 734646167000
View all Lexmark 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing the disk Disk bracket You need a Phillips screwdriver to install the disk. 1 Complete the steps in "Removing the system board" on page 38. 2 Locate the disk bracket underneath the system board. 3 Hold the hard disk so the ribbon cable extends upward. 4 Slide the disk all the way into the bracket. 5 Insert the screws provided with the option into the back of the system board. Securely tighten the screws. 46 Install memory and network options
![](/manual_guide/products/lexmark-1200-setup-guide-bbc96c0/52.png)
46
Install memory and network options
Installing the disk
You need a Phillips screwdriver to install the disk.
1
Complete the steps in “Removing the system
board” on page 38.
2
Locate the disk bracket underneath the system
board.
3
Hold the hard disk so the ribbon cable extends
upward.
4
Slide the disk all the way into the bracket.
5
Insert the screws provided with the option into the
back of the system board. Securely tighten the
screws.
Disk bracket