Lexmark 12L0102 Setup Guide (2.8 MB) - Page 176
AppleTalk, network printing, Drivers, MarkVision and Utilities
UPC - 734646288002
View all Lexmark 12L0102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
AppleTalk Each Macintosh user on the AppleTalk network who wants to use the network printing printer needs to complete the following steps: Note: A PPD file customizes the LaserWriter driver for your particular printer model. 1 In the Chooser, select the LaserWriter 8 driver. 2 Select the new printer. - If you have a routed network, you must select the new printer from the default zone for the network. If you do not know which zone to select, look on the network setup page under AppleTalk for Zone. - If you do not know which printer to select, look on the network setup page under AppleTalk. The default name of the printer is listed beside Name. 3 Click Create. 4 If you are prompted to select the PPD (PostScript Printer Description), follow these steps to install the proper PPD from the Drivers, MarkVision and Utilities CD: a Launch the CD. b Click Lexmark Installer. c Select the appropriate PPD for your printer. d Click Install. e Go back to the Chooser and try to create the new printer again. 5 Look for an icon to appear in the Chooser next to the printer name. This means a PPD is associated with the network printer. A new desktop printer icon is also placed on your desktop. 6 In the Chooser, select the printer you want to use now, and then close the Chooser window. If you experience problems setting up AppleTalk, refer to the documentation on the Drivers, MarkVision and Utilities CD. After launching the CD, click View Documentation and then click MarkNet Print Servers. 164 Set up network addresses