Lexmark 12L0102 Setup Guide (2.8 MB) - Page 7

Preface Message map Operator panel On/off button Tray 1 Tray 2 Tray 3 About your printer Standard output bin Toner box (Cover A) Fuser cover (Cover B) Side door (Door C) Jam access door (Door D) Jam access door (Door E) Three printer models are available: • The Optra W810 printer, delivering 600 dots per inch (dpi) resolution at up to 35 pages per minute (ppm), ships with one 250sheet tray and two 500-sheet trays. The W810 printer comes with 16MB of standard memory. • The W810n, a network model, comes with an Ethernet 10/ 100BaseTX print server installed and 16MB of standard memory. • The W810dn, a network model with duplexing capabilities, comes with 32MB of standard memory. The illustrations in this manual represent the Optra W810 model, with the configuration shown at the left, unless it's necessary to show another configuration. Depending on the printer model you have chosen and the options you install, your printer may look different. The figure on the following page illustrates the Optra W810 and all the available paper handling options. Instructions for installing these options are included in this manual. Preface vii