Lexmark 13R0245 Setup Guide - Page 100
Printer receives a blank fax, Received fax has poor print quality, Check original document, Check ink
UPC - 734646317016
View all Lexmark 13R0245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Printer receives a blank fax These are possible causes and solutions. Try one or more of the following: Check original document Ask the sender to verify the original document was loaded correctly. Check ink Check the ink levels, and install a new print cartridge if necessary. Check cartridges 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 1 2 3 Reinsert the print cartridges. Received fax has poor print quality These are possible causes and solutions. Try one or more of the following: Review checklist for sender • Check that the quality of the original document is satisfactory. • Resend the fax. There may have been a problem with the quality of the telephone line connection. • Increase the fax scan resolution. Check ink Check the ink levels, and install a new print cartridge if necessary. Clean scan lens and white roller 1 Unplug the power cord and the phone line from the wall. 2 Open the control panel. 3 Push the roller lever gently to the left, pull it forward, and then lift the white roller out of the printer. 4 Use a clean, lint-free cloth dampened with water to wipe the white roller and the scan lens. Note: The scan lens is located under the white roller. 5 Reinstall the dry white roller, push the roller lever gently to the left, and then snap it in to place. 6 Reconnect the power cord and the phone line. 187