Lexmark 13R0245 Setup Guide - Page 89
Duplex unit does not operate correctly, Memory card troubleshooting, Memory card cannot be inserted
UPC - 734646317016
View all Lexmark 13R0245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
3 Firmly grasp the paper, and gently pull it out. 4 Push down on the duplex latch as you reinstall the duplex unit. 5 Press . 6 On your computer, delete or stop the print job, and then try resending the print job again. Duplex unit does not operate correctly These are possible solutions. Try one or more of the following: Check paper size and type Check the paper size and type to make sure the paper is supported by the printer. If you are using automatic duplexing, use only letter- or A4-size plain paper. Check for paper jams Check for and clear any paper jams. For more information, see "Paper jam in the duplex unit" on page 175. Make sure the duplex unit is properly installed Remove the duplex unit and reinstall it. For more information, see "Paper jam in the duplex unit" on page 175. Memory card troubleshooting Memory card cannot be inserted These are possible solutions. Try one or more of the following: Check memory card type Make sure that the type of memory card you are using can be used in the printer. Check memory card placement Make sure you have inserted the memory card in the correct slot. 176