Lexmark 15W0003 User's Guide - Page 282
Removing an interface card, Remove the two screws securing the interface card to the rear cover.
![]() |
UPC - 734646300032
View all Lexmark 15W0003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Removing an interface card You need a number 2 Phillips screwdriver to remove an interface card. 1 Make sure the printer is turned off and the power cord is unplugged. 2 Complete the steps for Removing the rear cover and system board if the rear cover and system board are still installed. WARNING: Interface cards are easily damaged by static electricity. Touch something metal before you touch an interface card. 3 Remove the two screws securing the interface card to the rear cover. Screws 4 Gently pull the interface card completely out of the connector. 5 Place the interface card in its original packaging. If you do not have the original packaging, wrap the interface card in paper and store it in a box. 282
![](/manual_guide/products/lexmark-15w0003-users-guide-28aed6a/282.png)
282
Removing an interface card
You need a number 2 Phillips screwdriver to remove an interface card.
1
Make sure the printer is turned off and the power cord is unplugged.
2
Complete the steps for
Removing the rear cover and system board
if the rear cover and
system board are still installed.
W
ARNING
:
Interface cards are easily damaged by static electricity. Touch something metal
before you touch an interface card.
3
Remove the two screws securing the interface card to the rear cover.
4
Gently pull the interface card completely out of the connector.
5
Place the interface card in its original packaging.
If you do not have the original packaging, wrap the interface card in paper and store it in a box.
Screws