Lexmark 15W0003 User's Guide - Page 95
Transfer the oil bottle and cleaner roll, Align the oil bottle with the slots in the new fuser.
![]() |
UPC - 734646300032
View all Lexmark 15W0003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Transfer the oil bottle and cleaner roll 1 Rotate the left and right green oil bottle locking levers on the old fuser to unlock the oil bottle and cleaning roll. 2 Lift the oil bottle from the old fuser. Note: Oil may drop from the bottom of the oil bottle. You can place a piece of paper under the bottle after you lift it to prevent oil from dropping on the printer, floor, or your clothing. 3 Align the oil bottle with the slots in the new fuser. 4 Lower the oil bottle into the fuser. WARNING: It takes approximately 30 minutes for the oil to reach the fuser after initial oil bottle installation. Make sure the oil bottle has been installed for at least 30 minutes 95
![](/manual_guide/products/lexmark-15w0003-users-guide-28aed6a/95.png)
95
Transfer the oil bottle and cleaner roll
1
Rotate the left and right green oil bottle locking levers on the old fuser to unlock the oil bottle
and cleaning roll.
2
Lift the oil bottle from the old fuser.
Note:
Oil may drop from the bottom of the oil bottle. You can place a piece of paper under
the bottle after you lift it to prevent oil from dropping on the printer, floor, or your
clothing.
3
Align the oil bottle with the slots in the new fuser.
4
Lower the oil bottle into the fuser.
W
ARNING
:
It takes approximately 30 minutes for the oil to reach the fuser after initial oil bottle
installation. Make sure the oil bottle has been installed for at least 30 minutes